Output Capacity: 10A (Direct Output).
Item Tag: DC 12V
Raspberry Pi. Use the up/down keys to switch to P2. Thermostat x1. The digital display shows P0. Use the UP/DOWN keys to switch to P1. Press the SET key again and use the UP/DOWN keys to set the desired stop temperature.
Alarm when temperature exceeds temperature limit or when sensor error. Switch the modes between cool and heat;.
Specifications: Voltage: DC 12V Power: 120W, 180W Current: 10A (120W), 15A (180W) Outer diameter of water inlet/outlet: 8mm / 0.31″ 120W: suitable for 30L fish tank 180W: suitable for 40L fish tank Size: 143 * 96 * 162mm / 5.62 * 3.77 * 6.37″ Features: 1. The cooler uses high-end refrigeration modules with high power and good durability. 2. The area of the cooling block is larger, so it can contact more water for rapid cooling. 3. Four hollow copper tubes with cooling powder inside will quickly dissipate heat, thereby improving cooling efficiency. Packing including： 1 * Fish Tank Chiller.
Suitable for: 40l Fish Tank. Power: 180w. Current: 15a (180w). the Cooler Uses High-end Refrigeration Modules with High Power and Good Durability. 1 Refrigerator Kit. the Four Hollow Copper Tubes with Refrigerant Inside Will Quickly Transfer Heat, Thereby Improving Cooling Efficiency.
Suitable for: 40l Fish Tank. Power: 180w. Current: 15a (180w). the Cooler Uses High-end Refrigeration Modules with High Power and Good Durability. 1 Refrigerator Kit. the Four Hollow Copper Tubes with Refrigerant Inside Will Quickly Transfer Heat, Thereby Improving Cooling Efficiency.
If it is used for heating, it should be set to H. If it is used for cooling, it should be set to C. For example, if we set the heating mode to a temperature of 37-40 degrees, then the difference is 3.
If it is used for heating, it should be set to H. If it is used for cooling, it should be set to C. For example, if we set the heating mode to a temperature of 37-40 degrees, then the difference is 3.
If it is used for heating, it should be set to H. If it is used for cooling, it should be set to C. For example, if we set the heating mode to a temperature of 37-40 degrees, then the difference is 3.